High Purity Sanitary Centrifugal Pump for Flow Control
KLX Series:
The centrifugal pump is made of stainless steel and with a shrouded motor.
Sanitary and cost-efficient design makes it perfect for the daries ,beverages, food-processing,
pharmaceutical and fine chemicals industries.
Operating Principles:
Housed inside the casing,impeller rotates in conjunction with the pump shaft.With this arrangement,
the impeller blades convey energy to the fluid in the form of kinetic energy and pressure energy.
This pump can't reversible by simple reversal of the direction of rotation.
The direction of rotation is clockwise when the pump is viewed from the rear side of the motor.
Design and Features:
Casing manufactured with cold-formed plate.Open impeller and close impeller manufactured
with stainless steel investment casting;
Adjustable stainless steel legs,pump designed according to 3A Sanitary standards.IEC or B34
motors, IP55, F-class insulation,50HZ,60HZ
Materials:
Technical specifications:
Options:
KLX Series:
The centrifugal pump is made of stainless steel and with a shrouded motor.
Sanitary and cost-efficient design makes it perfect for the daries ,beverages, food-processing,
pharmaceutical and fine chemicals industries.
Operating Principles:
Housed inside the casing,impeller rotates in conjunction with the pump shaft.With this arrangement,
the impeller blades convey energy to the fluid in the form of kinetic energy and pressure energy.
This pump can't reversible by simple reversal of the direction of rotation.
The direction of rotation is clockwise when the pump is viewed from the rear side of the motor.
Design and Features:
Casing manufactured with cold-formed plate.Open impeller and close impeller manufactured
with stainless steel investment casting;
Adjustable stainless steel legs,pump designed according to 3A Sanitary standards.IEC or B34
motors, IP55, F-class insulation,50HZ,60HZ
Materials:
| Parts in contact with pumped media | AISI-316/304 |
| Gaskets(standard) | EPDM(FDA) |
| Mechanical seal(standard) | SIC/EPDM |
| Inside surface finishing | Ra less than or equal 0.8 micron |
| Outside surface finishing | Sandblast or mirror polish |
Technical specifications:
| MAX.FLOW | 150stere/h |
| MAX.HEAD | 70h(M) |
| Max.working temperature | 120 degree C/248 degree F (30min CIP/SIP) |
| MAX.REV | 3600Min-1 |
| Certificate | 3A-02-10/NO.1579,FDA.177.2600 |
Options:
| Mechanical seal in | C/SIC, TC/TC |
| Gaskets in | FPM(VITON) and NBR |
| Connections | Clamp,thread,flange,DIN,SMS,RJT,IDF |
| Motor | 2900,1450,3600Min/1, 50HZ, 60HZ |